Konsolenprofis.de > Anleitungen > Xbox > LPC Mod v2.0

Switchmod Installation

If you want to install the Switchmod then there's no need to solder the bridge like described above.

First Step is to bridge pins 1+5 and pins 6+8 like shown in the following picture:

Solder Pin "8" of the Switchmod to Pin "B" of the LPC Mod

Now solder wires from the pins of the Chip to the points of the mainboard:

When you now start the X-Box by a short press on the power-button it starts from the LPC Modchip. To disable the Modchip just power on the Xbox by pressing the Powerbutton for 3 seconds!